Why Choose PLA PLUS Filament ?

1. Environmentally friendly and non-toxic, biodegradable;
2. Bright color;
3. low shrinkage;
4. High strength and stiffness;
5. Good toughness Not easily brittle;
6. 10 times higher toughness than PLA on the market
Smooth printing, finished product surface is more smooth and delicate;

Suitable for all models of FDM3D printers, suitable for printing crafts, artwork, industrial design samples and product models with higher toughness requirements, etc.

Wire diameter: 1.75/3.0MM Tolerance: ±0.02MM
Printing temperature: 205-215℃
Suggested printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1 KG / roll
Gross weight: 1.3 KG / roll
Length: 1.75MM(1KG)=330M

Feature

1. Environmentally friendly and non-toxic, biodegradable;
2. Bright color;
3. low shrinkage;
4. High strength and stiffness;
5. Good toughness Not easily brittle;
6. 2-3 times more than other PLA+ on the market;
7. More unlikely to crack;
8. Can meet or close to 300MM / S printing speed;
9. Printing drawing effect is better than PLA + and competitors.
Smooth printing, finished product surface is more smooth and delicate;

Suitable for all models of FDM3D printers, suitable for printing crafts, artwork, industrial design samples and product models with higher toughness requirements.

Why choose SUNLU AntiString PLA Filament？

1. Print difficult models without drawing
2. Beginners print without drawing
3. Fast printing without drawing
4. Printer performance is poor print also does not pull the wire
5. Printing high precision

Why choose SUNLU PLA META Filament？

1. Environmentally friendly and non-toxic, biodegradable;
2. Soft, warm colors
3. low shrinkage;
4. High strength and stiffness;
5. Good toughness, not easy to brittle breaks
6. Printing temperature of 185-195°. Lower printing temperature, more energy-saving and environmentally friendly, reduce printer loss.
7. Good fluidity: Printing smoothness is better than the existing PLA and PLA +, greatly improving the success rate of printing.

Why choose SUNLU SUNLU High Speed PLA Filament？

1. 0~100mm/s normal speed printing quality is better than PLA, the surface is smoother, the overhang performance is better, the overhang angle is less than 70 ° can not be added support, greatly saving printing time and material waste.
2. mobility enhancement of 500%, 250mm / s above the speed of printing without plugging, no lack of material.
3. 180% increase in heat dissipation performance, faster cooling under the same conditions, fast printing without piling up materials.
4. High crystallization temperature, fast curing speed. Rapid printing drape performance is better, (printer air cooling performance is excellent under the premise of draping angle less than 70 ° can not add support).
5.180~195℃ low temperature fast printing, save time, more energy saving.
6. Low shrinkage toughness, fast printing is not easy to crack, smooth surface.
Neat row of lines, line diameter uniformity, fast printing without knotting, even and smooth discharge.

SUNLU 100% Wound Neatly Filament

SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.

【Compatibility rate up to 99%】

for BambuLab AI Printer

for BambuLab Printer

for Raise 3D Printer

for BlueMaker Printer

for Creatity Printer

for Anycubic Printer

for ELEGOO Printer
Compatible with 99% of 3d printers on the market

【Shipping Notice:】

Our warehouse currently stocks two spool types (Removable Spool & Plastics Spool). Orders will be fulfilled with random spool selection based on inventory availability.

Removable Spool : Detachable design for easy filament removal

Plastics Spool: Fixed non-detachable structure

Important:

If spool type is critical for your use case, please confirm your acceptance before ordering.

Thank you for your understanding and happy printing! 🖨